InnoGear Mic Boom Arm Microphone Stand Cable Management for Blue Yeti FIFINE AM8 K669B HyperX QuadCast S SoloCast AT2020 Shure SM7B MV7 and Other Microphone

InnoGear Mic Boom Arm Microphone Stand Cable Management for Blue Yeti FIFINE AM8 K669B HyperX QuadCast S SoloCast AT2020 Shure SM7B MV7 and Other Microphone에 대한 13개 리뷰

1. 

   Dennis – 18/05/2025

   Well worth the money
   I really like this boom stand. It looks good and is sturdy. It does its job well, and moves smoothly and easily. I cannot speak as to how it would do with a really heavy mic, but for mics of light to medium weight, it should work very well. It is perfect for my Shure SM57.I also like the fact that they have not splashed the name of the company brightly on the stand. In fact there is no name at all on the stand bright or otherwise, which I appreciate. I have no desire for my videos to be a constant commercial for a brand or company. I would easily buy another one of these if the need should arise.

2. 

   Shops-A-Lot1 – 18/05/2025

   Strong and stays out of the way
   Thie stand holds a Shure MB7B. Its a heavy microphone and needs to extend across my table and not block me out on camera. I love the mic attachment as it’s a long screw which has a very low profile next to the large black mic attached to it. Dont need any more bulk at the joint. Great for a small area where a heavy mic is used. Looks great too. And it has a cable hiding track built in. It’s a keeper.

3. 

   Hannah Langworthy – 18/05/2025

   Life Changing
   I love it so much compared to my last mic arm. Very sturdy and has nice cable cable channel to wire mic cable through

4. 

   Forester – 18/05/2025

   Great mic arm. Faint squeak about 2 years later. Overall would buy again
   After a couple of years of use this has held up well. I use this mic arm on a daily basis and it hasn’t given me any crazy issues. The only thing that has developed was a faint squeak occasionally but nothing too distracting. Nothing the mic will be able to pick up. The clamp and joints of the stand have held themselves together well after moving the arm around a lot and with a shaky desk. I do like how tall you can adjust the arm to move anything you have attached out of the way. Great for dual monitors without compromising desk space.

5. 

   Gilbert Collier – 18/05/2025

   Would purchase again
   Very easy to put together the clamp quality is very good I have had no issues. It has a really good range of motion and also comes with an adapter for smaller or larger mics. Extremely high value for money and functions smoothly.

6. 

   SarpyJr – 18/05/2025

   Great Mic Stand
   I have been using the InnoGear Microphone Management Channels system for a while now, and it’s great. The design is both sleek and built nice. It is easy to adjust and and stiff at the same time.

7. 

   Jared – 18/05/2025

   Good Arm, Bad Clamp
   For a first-time boom arm purchase, this is a fairly decent purchase. If you’re looking for a decent and sturdy boom arm, this is a reasonable low-price option.The arm itself is rather solid and well put together, with nice smooth movement and easy-of-use. It is able to hold the weight of my microphone fairly easily, with no drooping or tilting. The arm is very sleek, coming with a compartment and cover for any wires to travel from the base up to the mic while staying hidden. This makes wire management easy and keeps your setup aesthetically clean. Also included is a riser that lifts the base of the boom arm a couple inches, for if you need the setup to be a little higher.The C-clamp that comes with is pretty bad. The clamp itself has terrible threadings, which have already worn through for me, rendering it completely unable to tighten and hold the weight of the boom arm and microphone. Along with this, the padding on the clamp is also terrible. Over time (3 months), the padding began to tear apart and squeeze out from the clamp. The material of the pad is also not desk-friendly, as it left behind a hideous mark on my desk from where the clamp was holding.Overall, I was incredibly impressed with the quality and integrity of the boom arm itself, but really disappointed that such a great arm suffers from being paired with an awful desk C-clamp. A decent purchase, but you get what you pay for. I recommend you replace the C- clamp immediately with something else if you decide to purchase.

8. 

   Mark – 18/05/2025

   Works fine!
   Works as stated and seems fairly sturdy.

9. 

   Augusto Romero – 18/05/2025

   TLDR: necesitas un adaptador 5/8 a 1/4 si quieres utilizarlo con un AT2035 y su montura antichoques.El producto como tal tiene 5 estrellas. Es un brazo de acero que se nota va a durar mucho más que el que tenía. Anteriormente adquirí el paquete de Audio Technica 2035 con su brazo y me duró unos 4 años. Hace un par de días desafortunadamente se rompió y decidí comprar éste y vaya sorpresa. Es mucho más fuerte que el de AT y la calidad del material y las piezas es superior en todos los aspectos. El brazo no se mueve tan fácilmente pero precisamente eso estaba buscando. Es rígido y manipulable.Sin embargo, hubo un problema serio: la tuerca para enroscar el micrófono no es compatible pues es 5/8 y mi micrófono es 1/4. Me dejé llevar por el anuncio pues decía que era compatible con el AT2035 (y además en la imágen dice que la rosca 5/8 es un “adaptador” y supuse que se podía quitar para dejarla 1/4) pero no lo es. Desafortunadamente me vi obligado a comprar un adaptador 5/8 a 1/4 adicional y tomará otro par de días hasta que pueda utilizar mi micrófono.Revisa bien que tu micrófono sea 5/8 y no 1/4 como es el estándard para que puedas utilizarlo. Esa es la única razón por la que no le doy 5 estrellas. Si no tienes este problema, es el mejor brazo que puedes comprar a este precio.

10. 

    alex – 18/05/2025

    Very easy to set up, good quality material, very easy to maneuver and use. I never had to adjust the clamp after I put it once onto the table. No idea what other people are having problems with their sm7b. I use it all the time and adjust it a lot for whatever position I need it in.

11. 

    Amazon Customer – 18/05/2025

    For me, this is a great product. Well constructed; feels heavy-duty. Extremely sturdy. The joints of the arm are very tight and hold (my) mic in place very well. Track tray for cabling; very easy to clip in and out. And no brand name on the arm that advertises for someone else! I’ve only had it for a few days, so I will update should the first impressions change. Very happy with this purchase.

12. 

    Patricia L – 18/05/2025

    Great item. I needed an arm for my new mic and this does the trick just fine. Great price for the quality.

13. 

    Jonnyfan – 18/05/2025

    Looks amazing with the clean black look and cable management channels. Really easy to setup with the peel back cable management and the one part screw in mount. Fits well with the mv7+ out of the box and is a great price for the quality. Sound quality is decent because there’s no additional sound from silly springs. And it holds the advertised weight.