Price: $119.99 - $107.99
(as of May 27, 2025 15:04:42 UTC – Details)
Extech Basic Accuracy 40-40,000 FC LED Light Meter.
Is Discontinued By Manufacturer : No
Product Dimensions : 5.3 x 1.9 x 0.2 inches; 4.94 ounces
Item model number : LT40
Batteries : 2 AAA batteries required. (included)
Date First Available : September 6, 2013
Manufacturer : Extech
ASIN : B00FF3X34M
Country of Origin : Taiwan
USB interface for easy setup and data download
Selectable data sampling rates from 1 second to 24 hours
LCD displays current readings, min/max and alarm status
Includes Windows 2000, XP and Vista compatible analysis software
product.”>Details)
Customers say
Customers find the light meter effective, easy to use, and appreciate its compact size and portability. The device is super accurate, with one customer noting it calibrates every time it’s turned on, and they consider it good value for money. They like its durability, with one mentioning it lasts at least 5 years, though some find the functionality cumbersome. Customers have mixed opinions about the light level, with one noting the backlight is blinding when close.
AI-generated from the text of customer reviews
Kyle Kisebach –
Compact and effective
Hard to beat this for compact, and its averaging function is helpful. Would be nice to save many averages so you can mark up a floor plan by just numbers, but you can always just mark up the readings.
Dr. K –
I would buy it again.
The Extech LT40 LED Light Meter is easy to use and appears to provide reasonable measurements. I say reasonable as i have no good method to determine the true accuracy of the meter, and the readings i get appear within a window of what i would expect for common light sources. I typically use it for readings of 10 foot-candles and below, usually in the 0.3 to 3.0 range, and with LED lighting, induction lighting, and metal halide lights.I performed a couple of measurements in an office environment and compared the readings to a lighting print of the area, and my readings were in the general area of what one would expect for the office area, and compared favorably with architectural lighting prints.The only drawback so far for me is the display is not backlit, so using it in the darker environment I am typically in can present a challenge at times, however, worst case I use the Hold feature and then read the display. Also, since the detector is fixed to the meter and not even rotatable, at times taking readings requires using the Hold feature if the meter needs to be facing away from me.For the money and the ease of use, I would buy this again.
Kevin K. –
Great meter. Get the one with separated sensor
Great meter. Seems super accurate, and quality. The cap that covers the light sensor always reads 0 and calibrates every time you turn it on. I use it for testing light intensity from my grow lights in a grow tent. I found it would have been much easier to read the lcd screen if the sensor was separated from the main module/screen. My grow plants are very close to the grow light so I end up barely being able to view the screen and the light is blinding that close so itâs hard to even read the screen if I can view it. A separated sensor just gives you more options for reading, but I understand it would be less portable.
Kpettit –
Good light meter, but not accurate at very low levels of light
Easy to use, and appears accurate at normal light levels; once under 0.5 foot candles, however, does not appear to be accurate (what should have read as 0.1 to 0.2 foot candles was reading as a 0)
Travis H –
Compact, affordable. I like it!
Really like this compact size versus my previous Extech LT300. The old meter died after 5 years and needed a replacement. This is the “LED compatible” version so I can get accurate readings no matter what type of lighting I’m measuring. The sensor is built into the unit instead of attached to a cord. I like that better because no cord to get tangled and I don’t need 2 hands to do my readings (since I normally have something else in the other hand). Easy to use, easy to read – hope it lasts at least 5 years!
Jackson Chambers –
Works Great
If you’re a security consultant or have a limited need for a light meter without using one professionally everyday this is a great buy and works well for the price.
Daniel Miller –
Quality meter without the wires
For the price, works great.Purchased this for use in acquiring night light meter readings on roadways. It allows for lux or foot candle measurements. The instruction manual covers the quirky min/max average function. Otherwise, it did a great job on the jobsite. The included bag provides for good storage and the device is sturdy and works good in a commercial environment.The only issue is there is no back light, which made night readings a little difficult. The fact that the light meter was integrated into the device meant there was no additional wires to manage.
JanetLynn –
If it’s not broke, don’t fix it
I purchased this light meter since it’s the exact model the AHJ uses. The model I bought is slightly different than the inspectors and electricians already have, and the change was unnecessary and irritating. They added a push button to allow the battery cover to slide off, which is located in the middle of the back of the meter body, so the light meter doesn’t sit flat on the ground anymore. Other than that, it’s a good meter at a good price.
Amazon Customer –
The only lihgt meter with all that we we’re looking for. We love the options and different light bulb settings that are programmed into this meter.
Chris –
Tut was es soll, leicht zu bedienen!
A.J. –
A great product at an incredible price….might have to wait awhile to find it at the sale price again…A very good LED light meter ….
Cliente Amazon –
Strumento di misura dedicato per luce emessa da sorgente a led, molto valido, risulta affidabile.
Andreas Pechtold –
Sturdy and reliable little light meter. Has become my reference light meter.Switches off automatically after 12 seconds but you can override this by pushing on the on/off button for 5 seconds.Automatic ranging very handy.Does not remember your preferences like in my case I am interested in the maximum value during a session so I have to remember to push the max button each time.Struggles in low light less than 5 lux due to the smallness of the sensor, so you cannot measure moon light.