Price: $95.00
(as of Jun 01, 2025 17:41:20 UTC – Details)
Introduction:
★ This FOTGA DP3000 Matte box (M3) is a professional device universally designed to accommodate all DSLR’s and camcorders and it compatible with any industry standard 15mm rail system.
★ The matte box gives provides the user full lighting control and prevents glare and lens flare with its foldable french flags and adjustable side wings.
★ It features precision engineered Swing-Away mechanism for quick lens changes.
★ It also provides a means of using filters and one of the 180 degrees rotating filter trays and much more!
Features
★ Universal design for all camcorders and DSLRs & Industry standard 15mm supporting rods
★ The kit includes one French flag, and two adjustable side wings. Each of the three flaps can be positioned and locked in place so as to suit different focal lengths by providing the maximum amount of shading without getting in the way of the shot.
★ For changing lenses quickly, the unit features a swing away design at a 90 degrees and allow height adjustable. Instead of moving the mounting position of the matte box, (which may be blocked by other rig accessories, or require rod extensions to fit), it can simply be slid outwards with just one screw to undo.
★ A set of 4 “donut” rings are included.(Size at 103mm,76mm,64mm,51mm).By fitting one of these rings, light from the rear of the matte box can be blocked out, leaving only the camera lens protruding through. Donuts are slightly flexible, and the four sizes range to fit almost any lens diameter.
★ 2 Dual-purpose filter trays, supporting 4×4″ filter sizes (One of the trays allow rotating 180 degrees)
Package Including:
1x FOTGA DP3000 Matte box (M3)
2x French Flags
2x Side Flaps
2x Filter holders
4x Donut size at 103mm, 76mm, 64mm, 51mm
Universal design for all camcorders and DSLRs & Industry standard 15mm supporting rods, center-to-center rails distance 60mm
You can easily swing-away the mattebox without disturbing the camera from the tripod and rail system.you can free open from one sides ,applied in the photographic process frequent replacement lenses and filters ,easily and convenience
The kit includes one French flag, and two adjustable side wings. Each of the three flaps can be positioned and locked in place so as to suit different focal lengths by providing the maximum amount of shading without getting in the way of the shot.
A set of 4 “donut” rings are included.(Size at 103mm,76mm,64mm,51mm).By fitting one of these rings, light from the rear of the matte box can be blocked out, leaving only the camera lens protruding through. Donuts are slightly flexible, and the four sizes range to fit almost any lens diameter.
This Fotga DP3000 Matte box (M3) is a professional device universally designed to accommodate all DSLR’s and camcorders and it compatible with any industry standard 15mm rail system
product.”>Details)
Intelenium –
Best matte box for the money!
Cannot go wrong. The carbon pieced ones aren’t any smoother than this. DP300 for the win.
Halyna Halaydida –
High Quality
A good product to impress clients, but itâs not necessary whatsoever. One problem I had was the weight caused my tripod to keep leaning forward without someone there to hold the cam straight. And the only other problem I had was the allen key bolts would loosen whenever the barn door was adjusted, that was slightly annoying. So I just taped an allen key to the outside of the door so it would be handy.
Mr. C. Marsocci –
Buyer beware of cheap products without any QC.
I am highly disappointed after mounting to my rig and learning that my lens will not center no matter how hard it try to align with the specific donut. If you look at the lens from the front, there is a gap of more than 1/4â (inch). It doesnât do the job of eliminating light if there is a gap in the donut. Its on a rod system that is lined up and centered to alleviate misalignment. The actual matte box connection arm is milled incorrectly causing this error.
Ashley –
Caused an inconvenience on a film set
Unfortunately, I decided to return this. The knobs do not secure the flags well so they fall off easily. The 1/4 screws on it loosens very easily. The matte box sits on the rods lopsidedly.
Jordan –
Great value for money
This matte box isnât perfect but dang itâs great value for what it offers. Two stage 4×4 filter trays, one rotatable. Top brow, side flags, aluminum and plastic feels tough. Having a swing away feature being a part of this is amazing and makes life easier switching lenses. I do wish there was a plastic doughnut design because the foam ones do get deformed easily. The screws for the pivoting of the flags did need to be tightened at first but Iâm going to be using this matte box for a while.