Price: $40.99
(as of May 14, 2025 14:49:52 UTC – Details)
Specification:
Diameter: 225mm
Applicable Model: for Insta 360 X3
Quantity: 1 PCS
Package Includes:
1x Replacement Camera Lens
Note:
Only the above package content, other products are not included.
Transition: 1cm=10mm=0.39inch.
Due to it is a manual measurement, please allow an error of about 1-3 mm.
Due to the difference between different monitors, the picture may not reflect the actual color of the item, please make sure you do not mind before ordering.
Compatible Model – This lens replacement is compatible with Insta360 X3 action camera. Please note that this is a replacement product, not an OEM product. (Please confirm your model before purchasing)
Durable Lens – High quality glass lens ensure long lifetime and better work performance for professional use
Professional Installation Needed- With this lens repair part. We suggest you replace it at your local repair store if you do not have any repair tools, so to gain professional installation results. There may be slight variations in the diameter of the lenses, but this does not affect fitting. We have tested with the models mentioned above
Nice Replacement Lens – Nice replacement lens, replace the original damaged, broken or old one, make you X3 X4 camera lens work properly
Satisfaction Guarantee – Buy with confidence! If you are not 100% satisfied with our products for any reason, please feel free to contact us any time, we will solve the issue for you within 24 hours. We try our best to ensure that you have a 100% satisfactory shopping experience
product.”>Details)
Dachi Fabelos –
It fit
Fit good to a Insta360 X4
mark s –
Works great
Is it a pain to switch out? Can be if youre not patient. Does it have the same coating on it as the original one? No, does that affect the quality? No
Joe Bagadonuts –
Perfect fit
This lens cover was a perfect fit for my 360 4th gen. Not an easy job to replace the lens covers but worth trying if your lens cover is scratched.
MSG. Drew –
Take your time and replace both lenses
Works very well. Tip: Buy 2. If you are already in there… replace both. Also… buy some LCD Repair Tape (thin). the back cover is held on to the camera with it and will have to be replaced to re-assemble it. Was pretty straight forward to replace. You will need to cut the ring off the original to get it off. It’s held on with epoxy. Other than that… Screws right on, no problem. TAKE YOUR TIME. Have patience. the plugs are tiny and the ribbon cable are fragile. When you put it back together, make sure to put in all the o rings.